Documento senza titolo

Protosicur is a revolutionary safety device designed to prevent accidents during the automatic movement of mobile closing systems such as motorised up-and-over doors.

Protosicur can be easily applied to any edge of an automatic closing barrier (sliding gates, up-and-over doors or sectional doors...). When any form of pressure is applied, however slight and in any direction (for example a hand stopping the gate), Protosicur not only immediately stops the travel direction of the moving barrier by triggering the watertight microswitches installed inside the system, but its particularly soft flexible sheathing also cushions the impact between the obstacle and the barrier, due to the inertia of the barrier itself .

The streamlined and essential design, applicable to any type of barrier architecture, the strict adherence to EN safety standards during project design stages, make Protosicur an absolutely innovative and exclusive product.

In order to respect the latest European safety standards, (EN 12978), Protosicur is equipped with self-test optical technology and has evolved in the Sicurstop Control version. The system is in fact made by several watertight sensors, connected in parallel, and finally shunted by a resistor, all controlled by an electronic card granting at all times full efficiency, having an optical warning signal (led) in case of malfunctioning.

TECHNICAL FEATURES PROTOSICUR

Microswitch technology.

-	Internal aluminium structure.
-	Low voltage watertight microswitches (protection rating IP67, contact points 1mA5V DC/6A 250V AC., working temperature from -40° C to +105° C);
-	Triple extrusion rubber outer sheathing, with internal foam section; height 76 mm (PROTOSICUR).
-	Steel leaf springs.
-	Class 2 fire-proof rating according to UNI regulations.
-	Closure caps in PA 6 20/F.V..
-	Available lengths: 1400 1600 1800 2000 2500 mm (can be shortened 200 mm on the end opposite to electrical connection box).
-	Certified CE (DM 98/37/CE - EMC 89/336 CEE - BT.73/23 CEE)

TECHNICAL FEATURES SICURSTOP CONTROL

Watertight sensor system with continuous self-test technology

-	Mechanical system, seal, lengths, assembly, clearance just as PROTOSICUR.
-	Watertight microswitches (protection rating IP67, contact points 1mA5V DC/6A 250V AC., working temperature from -40° C to +105° C);
-	12-24 V ac/dc electronic control card input;
-	Contact output: 30 V ac/dc (1)A;
-	Visual diagnosis system through lighting leds (resistor fault, system triggering, mains presence);
-	Statement of conformity CE ( - No. of the RW TÜV certificate: MD/04/I/004 – Tested and deposited by RW TÜV Italy - Deposited with the IMQ (Notified Body 0051).